Tool Steel
| Title | Description | Classification | Physicals | Data Sheet | SDS Sheet |
|---|---|---|---|---|---|
| 62 FC | Used to repair and reclaim AISI M-1 and M-2 high-speed tool steels. Also used to build composite parts, or give a M2 wear surface on a less expensive base material. | AISI M-2 tool steel | 59-63 Rc as welded | Data Sheet | SDS Sheet |
| 420 SWT | A 400 series martinsitic stainless used for mold and die repair, and repair of 420 stainless. | AISI 420 | 51-54 Rc as welded | SDS Sheet | |
| 4130 SWT | Can be used for the repair of 4130 alloys. Can be flame hardened to 50+ Rc. | AISI 4130 | 30-35 Rc as welded | SDS Sheet | |
| 6201 FC | High hardness weld deposit with minimal cracking that withstands severe abrasion. | AISI M-1 tool steel | 59-63 Rc as welded | Data Sheet | SDS Sheet |
| A-2 SWT | For repair and fabrication of air hardening grades of tool steel. Can be used on extrusion dies, blanking dies, punches and trim dies. | AISI A-2 | 50-55 Rc as welded | SDS Sheet | |
| D2 MC | A metal-cored, air hardening AISI D2 alloy available in gas shielded, and TIG wires. The weld deposit is fully heat treatable. | AISI D2 | 38-42 as welded 58-62 Rc heat-treated | Data Sheet | SDS Sheet |
| F54 SWT | Machinable 5% Chrome hot work tool steel. Very suitable for die casting dies, extrusion dies and forging dies. | 5% Cr hot work tool steel | 30-35 Rc as welded | SDS Sheet | |
| H-12 SWT | Excellent all purpose alloy for hot and cold working tools. This 5% chrome alloy is a good choice for hot and cold trim dies, shear knives, punches and forging dies. | AISI H-12 | 53-57 Rc as welded | SDS Sheet | |
| H12 MC | A metal-corded, H-12 hot work alloy designed to provide wear resistant deposits. This alloy performs especially well when rebuilding worn edges of hot trim dies. | AISI H-12 | 50-55 Rc as welded | Data Sheet | SDS Sheet |
| M-2 SWT | AISI M2 tool steel. For repair of M2 and D2 tool steel. Used in forming dies, knives, shear blades and drills. | AISI M2 | 60-64 Rc as welded | SDS Sheet | |
| M-250 SWT | Maraging 250 alloy. This alloy generates deposits that are 30-32 Rc and machinable as welded. Age hardening at 950˚F will increase hardness up to 49-51 Rc. Yield Strength of 250,000 psi. | UNS# K92890 ASTM A538/A53M (B) | 30-32 Rc as welded | SDS Sheet | |
| P-20 SWT | AISI P-20 alloy for repair of plastic molds where a color match is needed. Tempers to 30-35 Rc. | AISI P-20 | 30-40 Rc as welded | SDS Sheet | |
| S-7 SWT | Shock resistant tool steel that is a “bearcat” on cold applications. Excellent for fabrication and repair of cold working tools including trim dies, cold shear knives and punches. | AISI S-7 | 54-57 Rc as welded | SDS Sheet | |
| S7 MC | A metal-cored, shock resistant AISI S-7 alloy, and is available in gas shielded, and TIG wires. | AISI S-7 | 54-58 Rc as welded | Data Sheet | SDS Sheet |
| T67 MC-T | This alloy is an excellent choice for touching up flash lines that see excessive wear at high heats. | AISI H19 | 50-55 Rc as welded | SDS Sheet |
Tell Us About Your Project
Please fill out the form below and we will get back to you shortly with your quote.