Maintenance
| Title | Description | Classification | Physicals | Data Sheet |
|---|---|---|---|---|
| 11 FC | Lower cost nickel containing alloy used to repair cast iron. | Fe-Ni-Cr 14% alloy | 30-35 Rc as welded | Data Sheet |
| 33 FC | 33% Ni alloy used to buildup cast iron and to join cast iron to steel. | Fe-Ni-Mn 38% alloy | 15-20 Rc as welded | Data Sheet |
| 55 FC | 53% Ni alloy used to join and repair cast iron. | Ni-Fe-Mn 56% alloy | 15-20 Rc as welded | Data Sheet |
| 68 FC | Versatile alloy for joining a variety of tool steels. Retains hardness after tempering when used on alloy steel. | Fe-Cr-Ni 15% alloy | 40 Rc as welded 160,000 psi tensile. | Data Sheet |
| 99 MC | 99% Ni alloy for joining and overlay of cast iron. | 99% Ni | 160 BHN as welded | Data Sheet |
| 712 FC | High Strength and corrosion resistant alloy used for joining dissimilar metals. | Fe-Cr-Ni-Mo 40% alloy | 20 Rc as welded 120,000 psi tensile. | |
| 3301 FC | 36% Ni alloy used to buildup cast iron and to join cast iron steel. | Fe-Ni-Mn 42% alloy | 15-20 Rc as welded | Data Sheet |
| 4130 FC | Responds to 4130 quench and temper. Also used as a flame-hardening alloy. | AISI 4130 type | Dependent on heat treatment, flame hardens to 52 Rc | Data Sheet |
| 4140 FC | Responds to 4140 quench and temper. Also used as a flame-hardening alloy. | AISI 4140 type | Dependent on heat treatment, flame hardens to 58 Rc | Data Sheet |
| 4340 FC | For repair of 4340 when weld metal must respond to same type of heat-treatment. | AISI 4340 type | Dependent on heat treatment, flame hardens to 58 Rc | Data Sheet |
| 6150 FC | Responds to 6150 quench and temper. Mostly used for flame hardening properties. | AISI 6150 type | Dependent on heat treatment flame hardens to 62 Rc | |
| 8620 FC | For Repair of 8620 when weld metal must respond to same type of heat-treatment. | AISI 8620 type | Dependent on heat treatment | Data Sheet |
| F15 FC | A very tough alloy for use in repair of columns and cylinders and other areas subject to cracking. | Fe-Ni-Cr-Mo 6% alloy | 15-20 Rc as welded 115,000 psi tensile | Data Sheet |
| F25 FC | This alloy is used to buildup worn areas subject to high impact and compressive loads such as rams, sow blocks and shanks. | Fe-Ni-Cr-Mo 8% alloy | 25-30 Rc as welded 132,000 psi tensile |
Data Sheet
Temp.Chart |
| F35 FC | For reclamation of hammer die impressions. This alloy is similar in wear properties to die block with a number 2 temper. | Fe-Ni-Cr-Mo 10% alloy | 35-40 Rc as welded 165,000 psi tensile |
Data Sheet
Temp.Chart |